 |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
ホーム  製品情報 ソフトウェア GPH-3100
|
|
|
|
|
|
![[GPH-3100]](/images/catalog/soft/gph3100.gif)
| 特長 |
| - The GPH-3100 supports up to the 30th power of 2 samples. The number of actual sampling data depends on the system.
- Sampling can synchronously start or stop with triggers. The sampling data before the trigger or after the trigger can be retrieved by using the trigger delay. - Input range selection and offset/gain calibration are programmable by software. (Some boards don't support them.) - The GPH-3100 supports various events: sampling completion, full-scale range detection, and so on. - The GPH-3100 supports every Interface analog input boards. - The GPH-3100 supports the parallel sampling, so you can simultaneously sample signals on two or more boards. - The GPH-3100 provides the calibration program. - The GPH-3100 provides useful sample programs, they help you to develop the application programs. - The sampling data can be saved into the disk, the saved data can be used with various application or programs. - The AdDataConv and AdReadFile functions allow you to convert the sampling data. - The GPH-3100 supports data conversion from binary to physical value and vice versa. - The noise can be removed by using the averaging. |
| 対応OS |
    ※ 製品毎の対応OSは、製品の個別ページを参照ください |
| 対象製品型式 |
| © 2021 Interface Corporation. All rights reserved. |
| |||||||||||||||||||||||||||||||||||||||||